What is Biodiesel?
Biodiesel is the name of a clean burning alternative fuel, produced from domestic,
renewable resources. Biodiesel contains no petroleum, but it can be blended
at any level with petroleum diesel to create a biodiesel blend. It can
be used in compression-ignition (diesel) engines with little or no modifications.
Biodiesel is simple to use, biodegradable, nontoxic, and essentially
free of sulfur and aromatics.
Is Biodiesel the same thing as raw
vegetable oil?
No! Biodiesel
is produced from any fat or oil such as soybean oil, through a refinery process
called transesterification.
This process is a reaction of the oil with an alcohol to remove the glycerin,
which is a by-product of biodiesel production. Fuel-grade biodiesel must be
produced to strict industry specifications (ASTM D6751) in order to insure
proper performance. Biodiesel is the only alternative fuel to have fully completed
the health effects testing requirements of the 1990 Clean Air Act Amendments.
Biodiesel that meets ASTM D6751 and is legally registered with the Environmental
Protection Agency is a legal motor fuel for sale and distribution. Raw vegetable
oil cannot meet biodiesel fuel specifications, it is not registered with the
EPA, and it is not a legal motor fuel.
For entities seeking to adopt a definition
of biodiesel for purposes such as federal or state statute, state
or national divisions of weights and measures, or for any other
purpose, the official definition consistent with other federal
and state laws and Original Equipment Manufacturer (OEM) guidelines
is as follows:
Biodiesel is defined as mono-alkyl
esters of long chain fatty acids derived from vegetable oils
or animal fats which conform to ASTM D6751 specifications for
use in diesel engines. Biodiesel refers to the pure fuel before
blending with diesel fuel. Biodiesel blends are denoted as, "BXX" with "XX" representing
the percentage of biodiesel contained in the blend (ie: B20
is 20% biodiesel, 80% petroleum diesel).
Is biodiesel used as a pure fuel
or is it blended with petroleum diesel?
Biodiesel can be used as a pure fuel or blended with petroleum in any percentage.
B20 (a blend of 20 percent by volume biodiesel with 80 percent by volume petroleum
diesel) has demonstrated significant environmental benefits with a minimum
increase in cost for fleet operations and other consumers.
Is it approved for use in the US?
Biodiesel is registered as a fuel and fuel additive with the Environmental
Protection Agency (EPA) and meets clean diesel standards established by the
California Air Resources Board (CARB). Neat (100 percent) biodiesel has been
designated as an alternative fuel by the Department of Energy (DOE) and the
US Department of Transportation (DOT).
How much
biodiesel has been sold in the US?
The National Biodiesel Board has released the following sales
volume estimates for the US:
2003 -- an estimated 25 million gallons
2002 -- 15 million gallons
2001 -- 5 million gallons
2000 -- 2 million gallons
1999 -- 500,000 gallons
How do biodiesel emissions compare to
petroleum diesel?
Biodiesel is the only alternative fuel to have fully completed the health
effects testing requirements of the Clean Air Act. The use of biodiesel in
a conventional diesel engine results in substantial reduction of unburned hydrocarbons,
carbon monoxide, and particulate matter compared to emissions from diesel fuel.
In addition, the exhaust emissions of sulfur oxides and sulfates (major components
of acid rain) from biodiesel are essentially eliminated compared to diesel.
Of the major exhaust pollutants, both unburned
hydrocarbons and nitrogen oxides are ozone or smog forming precursors.
The use of biodiesel results in a substantial reduction of unburned
hydrocarbons. Emissions of nitrogen oxides are either slightly
reduced or slightly increased depending on the duty cycle of the
engine and testing methods used. Based on engine testing, using
the most stringent emissions testing protocols
required by EPA for certification of fuels or fuel additives in the US, the
overall ozone forming potential of the speciated hydrocarbon emissions from
biodiesel was nearly 50 percent less than that measured for diesel fuel.
Can biodiesel help mitigate global
warming?
A 1998 biodiesel lifecycle study, jointly sponsored by the
US Department of Energy and the US Department of Agriculture, concluded
biodiesel reduces net CO² emissions by 78 percent compared
to petroleum diesel. This is due to biodiesels closed carbon
cycle. The CO² released into the atmosphere when biodiesel
is burned is recycled by growing plants, which are later processed
into fuel..Is biodiesel safer than petroleum diesel? Scientific
research confirms that biodiesel exhaust has a less harmful impact
on human health than petroleum diesel fuel. Biodiesel emissions
have decreased levels of polycyclic aromatic hydrocarbons (PAH)
and nitrited PAH compounds that have been identified as potential
cancer causing compounds. Test results indicate PAH compounds were
reduced by 75 to 85 percent, with the exception of benzo(a)anthracene,
which was reduced by roughly 50 percent. Targeted nPAH compounds
were also reduced dramatically with biodiesel fuel, with 2-nitrofluorene
and 1-nitropyrene reduced by 90 percent, and the rest of the nPAH
compounds reduced to only trace levels.
Does biodiesel cost more than other alternative
fuels?
When reviewing the high costs associated with other alternative fuel systems,
many fleet managers have determined biodiesel is their least-cost-strategy
to comply with state and federal regulations. Use of biodiesel does not require
major engine modifications. That means operators keep their fleets, their spare
parts inventories, their refueling stations and their skilled mechanics. The
only thing that changes is air quality.
Do I need special storage facilities?
In general, the standard storage and handling procedures used for petroleum
diesel can be used for biodiesel. The fuel should be stored in a clean, dry,
dark environment. Acceptable storage tank materials include aluminum, steel,
fluorinated polyethylene, fluorinated polypropylene and teflon. Copper, brass,
lead, tin, and zinc should be avoided.
Can I use biodiesel in my existing diesel
engine?
Biodiesel can be operated in any diesel engine with little or no modification
to the engine or the fuel system. Biodiesel has a solvent effect that may release
deposits accumulated on tank walls and pipes from previous diesel fuel storage.
The release of deposits may clog filters initially and precautions should be
taken. Ensure that only fuel meeting the biodiesel specification is used.
Where can I purchase biodiesel?
Biodiesel can be made available anywhere in the US. The National Biodiesel
Board (NBB) maintains a list of registered fuel marketers. A current list is
available on the biodiesel web site at www.biodiesel.org or
by calling the NBB at (800) 841-5849. A list/map of truck-accessible locations
is available on this website, under Biodiesel Fueling Sites.
Who can answer my questions about biodiesel?
The NBB maintains the largest library of biodiesel information in the US.
Information can be requested by visiting the biodiesel web site at www.biodiesel.org,
by emailing the NBB at
info@nbb.org,
or by calling NBBs toll free number
(800) 841-5849.
For more information on
the general and technical definitions of biodiesel, the distinction
between the two and why those distinctions are important,visit
the National Biodiesel Board's website - click
here. |